Petrolum

X-ray Fluorescence Sulfur-in-Oil Analyzer

Description:
Meeting standard :
GB/T 17040, SH/T0742 GB/T11140 on repeatability and reproducibility,
ASTM D4294.

Applications : It is used to determine the sulfur content in light oils(such as gasoline, kerosene) which the Reid vapor pressure is not higher than 600mmHg as per GB/T380.

Previous : Acid Value Tester in Petroleum Product

Next : Sulphur Content Tester(Lamp Method)

Product Introduction

Application :
The instrument is specially designed to determine sulfur content in the petroleum products.
Adopts energy-dispersive principle, and with electrical, mechanical and microprocessor integration design, so it is rapid and accurate.
It provides a measure to determine sulfur content during petroleum or petrochemical production process.

Main Technical Specifications

Measuring range	20 ppm to 5%
Repeatability (r)	＜0.02894 (X+0.1691)
Reproducibility (R)	＜0.1215(X+0.5555)
Detection limit	7 ppm
Oil sample quantity	2.5 ml (it is equal to sample depth of 4.5 mm)
Measurement time	it can preset 60, 120, 240, 300, and 600 s at random
Power supply	AC 220V±20V, 50 Hz; Rated power: 30 W
Dimension and weight	468mm×368mm×136mm; 13 kg
Working condition	a. Ambient temperature: 5~40℃ b. Relative humidity: ≤85% (30 ℃)=
It can make measurement automatically for single sample. Repeat times: can set 2, 3, 5, 10, and 50 at random; it will show average value and standard deviation at end of measurement.
Calibration curve numbers: it can save 9 calibration curves. 5 pieces of them are unary linear equation and 4 pieces of them are unary quadratic equation.